# How to customize module in Xcos?

**URL:** <https://scilab.discourse.group/t/how-to-customize-module-in-xcos/189>\
**Category:** General usage\
**Created:** [October 15, 2023, 9:31am UTC](https://scilab.discourse.group/t/how-to-customize-module-in-xcos/189 "2023-10-15T09:31:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rendong\_wang](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@rendong\_wang](https://scilab.discourse.group/u/rendong_wang)\
**Post date:** [October 15, 2023, 9:31am UTC](https://scilab.discourse.group/t/how-to-customize-module-in-xcos/189/1 "2023-10-15T09:31:45Z")

</div>

Dears,

Would you advice where I can find an example (step by step) to build a Xcos module per my own specification?

From UM, I only understood it can be built (programmed) from C, Sci,etc., but I still don’t understand how-to.

Thanks.

Best regards,  
Wang RD

---

<div class="post-metadata">

**Author:** ![Neo1](https://avatars.discourse-cdn.com/v4/letter/n/b9bd4f/32.png) [@Neo1](https://scilab.discourse.group/u/Neo1)\
**Post date:** [October 17, 2023, 8:06am UTC](https://scilab.discourse.group/t/how-to-customize-module-in-xcos/189/2 "2023-10-17T08:06:43Z")

</div>

see [https://www.youtube.com/watch?v=KgBD52cRNJk](https://www.youtube.com/watch?v=KgBD52cRNJk)

---

<div class="post-metadata">

**Author:** ![rendong\_wang](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@rendong\_wang](https://scilab.discourse.group/u/rendong_wang)\
**Post date:** [October 19, 2023, 3:25am UTC](https://scilab.discourse.group/t/how-to-customize-module-in-xcos/189/3 "2023-10-19T03:25:14Z")

</div>

I’ll watch it when I can access youtube. Thanks.  
Best regards,  
Wang RD